Included Accessories; Presser Feet - Husqvarna Viking Sapphire 930 User Manual

Included accessories

Presser Feet

Utility Foot A
Utility Foot B
Buttonhole Foot C
Blind Hem Foot D
Zipper Foot E
Non-Stick Glide
Foot H
Edging Foot J
Embroidery/
Darning Foot R
Sensor One-Step
Buttonhole Foot
2
3
1
11
6
Attached on the machine upon delivery. This foot is used mainly for straight stitching and
zigzag stitching with a stitch length longer than 1.0.
When sewing decorative stitches or short zigzag stitches and other utility stitches with
less than 1.0 mm stitch length, use this foot. The tunnel on the underside of the foot is
designed to feed smoothly over the stitches.
This foot is used for sewing buttonholes step by step. Use the guide lines on the toe of
the foot to position the garment edge. The two tunnels on the bottom of the foot ensures
cording for corded buttonhole.
This foot is used for blind hem stitches. The inner edge of this foot guides the fabric. The
right toe of the foot is designed to ride along the hem edge.
This foot can be snapped on either to the right or to the left of the needle, making it easy
to sew close to both sides of the zipper teeth. Move needle position to right or left to sew
closer to zipper teeth or for covering large cording.
This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or
leather to minimize the risk of these materials sticking to the foot.
prevents puckering at the edge of the fabric.
When connected to the machine, the buttonhole is sewn in a suitable length to the button
size that has been entered into the machine.
9
7
5
4 6
8
10
1. PICTOGRAM Pen
™
4. Brush
9. Extra spool caps, one large, one
10. Multipurpose tool/button reed
small.