Program - Husqvarna Viking SAPPHIRE 9650Q User Manual

PROGRAM

You can combine stitches and/or letters and numbers to
create programs. Combine various decorative stitches and
stitch fonts from the machine or from an external device.
• Enter the Program window by touching the PROG
icon on the Start Menu.
• Touch the Stitch or Font Menu to open the stitch or a
font you wish to use. You can also Touch & Hold to
open Stitch menus and Font menus.
• The active position is marked by a cursor and the
selected stitch or letter will be marked in red. Inserted
stitches will be placed at the cursor. Only the selected
stitch can be adjusted. Move the cursor through the
stitch program using the arrows on the screen.
• When changing a stitch in Program mode, it is only
the marked stitch that is changed. If you enter Sewing
Mode, you can make adjustments on the entires stitch
combination.
• To close the Program window and sew your
programmed stitch, touch the OK icon or just press
the foot control or Start/Stop button.
Note: If you mix tapering stitches with other stitches in PROG, the
programmed stitch cannot be tapered. However, if you only program
tapering stitches, the entire programmed stitch can be tapered.
5:2
Program length
Navigation
Cursor
Sewing Information
Stitch Menu
Font Menu
Stitch Width
Stitch Length