Presser Feet - Husqvarna Viking Viking Topaz 40 User Manual

PRESSER FEET

7
7
7
7
7
1:10
Utility Foot A
Snapped onto the machine upon delivery. This foot is used mainly for straight stitching and zigzag
stitching with a stitch length longer than 1.0.
Decorative Stitch Foot B
Use this foot for sewing close zigzag stitches (satin stitches) with less then 1.0 mm stitch length
and decorative stitches. The tunnel on the underside of the foot is designed to feed smoothly over
the stitches.
Buttonhole Foot C
For manual buttonholes. This foot has guide lines to determine buttonhole length. The middle
5 / 8
measures a '' (15 mm) from the fabric edge. The two tunnels on the underside of the foot
ensure a smooth feed over the buttonhole columns. The finger on the back of the foot holds
cording for corded buttonholes.
Blindhem Foot D
This foot is used for blindhem stitches. The inner edge of this foot guides the fabric. The right
toe of the foot is designed to ride along the hem edge.
Zipper Foot E
This foot can be snapped on either to the right or to the left of the needle. This makes it easy to
sew both sides of the zipper. Move needle position to right or left to sew closer to zipper teeth or
for covering large cording.
Edging Foot J
This foot is used for overcasting and seam/overcasting, with stitches that have a stitch width of
5.0 and 5.5 mm. Stitches form over the pin which prevents puckering at the edge of the fabric.
Embroidery/Darning Foot R
This foot is used for free motion embroidery/quilting/stitching and hoop embroidery.
Sensor One-Step Buttonhole Foot
Plug into the machine then enter the desired buttonhole length to sew Sensor One-Step
Buttonholes. The middle mark measures a
Glide Sole
If sewing on foam, vinyl, plastic, or leather, the material might stick to the foot and prevent the
sewing machine from feeding properly. When using any of the above materials, sew on a piece of
scrap fabric, to make sure the machine feeds smoothly. If not, fasten the self-adhesive glide soles
to the underside of the presser foot.
5 / 8
" (15 mm) from fabric edge.