Programmed Playback (Video Cds And Cds) - Pioneer PDV-10 Operating Instructions Manual

Advanced Functions
Programmed playback - Video CDs and CDs
Use the following procedure to play video CDs or CDs in the desired order. Up to
24 steps can be programmed.
Remote control unit only
3
PLAY
2
2
Note:
Programmed playback is not possible
during PBC playback on video CDs.
98
En
4 ¢
CLEAR
1 3 ¡
e 8 E 7
1
1
Press the PROGRAM button.
The program screen appears.
Program Track
Current: Track
Total Time
— — — —
— — — —
— — — —
Move
ENTER
2
Press the number buttons
while pressing the SHIFT
button to specify the tracks in
the order in which you want to
play them.
For example, to program tracks 9, 7 and
18, press 9, 7, +10 then 8.
3
Press the ENTER button.
Playback begins in the programmed
order.
• Press the CLEAR button to stop
programmed playback.
• Press the PROGRAM button to return
to the previous screen. Programmed
playback does not start until the PLAY
or ENTER button is pressed.
2(/2)
0:00
— — — —
— — — —
— — — —
Play Exit
PROGRAM