Pioneer PDV-10 Operating Instructions Manual page 107

3
Press the ENTER button.
If the password has not yet been set,
the password setting screen appears.
Audio1 2 Video Language
Parental Lock: Register Code Number
– – – –
i Enter 4-Digit Code
Move
+ / –
If the password has already been set,
the password input screen appears.
Audio1 2 Video Language
Parental Lock: Confirm Code Number
– – – –
i Enter 4-Digit Code
Move
+ / –
4
Use the cursor buttons (5/∞)
to input numbers between 0
and 9.
Audio1 2 Video Language
Parental Lock: Register Code Number
– – –
2
i Enter 4-Digit Code
Move
+ / –
On the remote control unit, press the
number buttons while pressing the
SHIFT button to input a 4-digit number.
The input numbers are displayed as
asterisks (*). Once the numbers are
input, proceed to step 6 .
General Other
Return Exit
SETUP
General Other
Return Exit
SETUP
General Other
Return Exit
SETUP
Advanced Functions
5
Press the cursor button (3) to
move the cursor to the right, then
input all four digits as in step 4 .
6
Press the ENTER button.
The parental lock level setting screen
appears. The default level is 8.
Audio1 2 Video Language
Parental Lock: Register Code Number
Level 1 2 3
i Set Parental Lock
Move
ENTER
7
Use the cursor buttons (2/3)
to select the level.
Refer to the disc's label.
Audio1 2 Video Language
Parental Lock: Register Code Number
Level 1 2 3
i Set Parental Lock
Move
ENTER
8
Press the ENTER button.
The parental lock level is set.
Notes:
• We recommend writing down the password.
• If you forget the password, the settings
can be reset to the factory default values.
(Page 118)
• The parental lock function cannot be set for
all DVDs. This function will not work with
DVDs on which the parental lock function is
not mentioned on the disc's jacket.
General Other
4 5 6 7 8
Return
Select Exit
SETUP
General Other
4 5 6 7 8
Return
Select SETUP Exit
107
En