Connecting To A Dolby Digital/Dts/Mpeg Decoder Or An Amplifier With A Built-In Decoder - Pioneer PDV-10 Operating Instructions Manual

Connecting the Player to Other Components
Connecting to a Dolby Digital/DTS/MPEG decoder or an amplifier with a
built-in decoder
With this player, the audio settings can be used to enjoy powerful Dolby Digital, DTS or MPEG
sound. Output the digital signals from the player's digital output to a decoder or amplifier with
built-in decoder. For instructions on making the audio settings, refer to "Setting the type of
amplifier to be connected (digital jack)" (page 45). We recommend these connections when
you are using the Pioneer VSX-808RDS amplifier.
Main unit front panel
Front speaker (left)
Surround
speaker (left)
Hint:
A compatible decoder or amplifier,
5 speakers (front left/right, center and
surround left/right) and a subwoofer are
required to enjoy Dolby Digital/DTS 5.1-
channel sound.
30
En
COLOR BRIGHT MONITOR
PHONES
DIGITAL OUT (OPTICAL)
Optical digital cable (included)
Center
speaker
DIGITAL IN
Pioneer VSX-808RDS, etc.
See page 29 for
ON/OFF HOLD details on connections
to the TV.
Front
speaker
Subwoofer
(right)
Surround
speaker (right)
Notes:
• The CD shockproof function (for preventing
skipping when playing music CDs) will not work
when an optical cable is connected. Do not
subject the player to shocks during playback.
• With the PDV-LC10, no sound is produced
from the player's speakers when an
optical cable is connected.
: Signal flow