Connecting To A Dolby Pro-Logic Decoder/Stereo Device - Pioneer PDV-10 Operating Instructions Manual

Connecting the Player to Other Components

Connecting to a Dolby Pro-Logic decoder/stereo device

When connecting the
PDV-LC10 to an external
component, set the AV-IN/
AV-OUT switch to AV-OUT
(the right side).
To S-Video input jack
S-VIDEO IN
See page 29 for details on
connections to the TV.
Hints:
• The picture can be viewed when either
the S-Video or video input jack is
connected.
32
En
VOLUME
S-Video cable
(included)
VIDEO IN
or
AV-IN AV-OUT AV-IN/OUT
S-VIDEO OUT
To video input
jack
Dolby Pro-Logic decoder/stereo
device (sold separately)
• When the player is connected to a Dolby
Pro-Logic decoder, DVDs recorded in 5.1-
channel Dolby Digital can be enjoyed in
the Dolby Pro-Logic mode. A center
speaker and surround speakers are
required in addition to the speakers shown
above in order to enjoy surround sound.
Main unit right side
Video/audio cable
(included)
To audio input jacks
AUDIO IN
R L
: Signal flow