Pioneer PDV-10 Operating Instructions Manual page 37

Notes for recharging
• When the battery pack is hot, it may
take longer than usual time for
recharging or may sometimes be
unable to be recharged. Wait for the
battery pack to cool down before
retrying recharging.
• If the recharge lamp will not light,
remove and fit the battery pack to the
battery charger again.
• If the recharge lamp blinks, try
recharging again under the allowable
temperature range (between +5 and
+35°C).
• To protect the battery pack, do not
recharge a fully charged battery pack
repeatedly. Repeated overcharging
may deteriorate the battery
performance.
• The battery pack becomes hot after
recharging, but this is not
malfunction.
• Be sure to remove the power plug
from the power outlet after
recharging. If the power plug is left
connected, power of about 1 Watt
will be consumed.
• When the battery pack is recharged
in a hot environment, it may not
recharge fully.
• The temperature during recharging
affects the recharging efficiency.
Recharging is most efficient between
temperatures of 10 and 30°C. Place
the battery charger in a place within
this temperature range whenever
possible.
Using the Battery
37
En