Making Settings With The Setup Navigator; Starting The Setup Navigator - Pioneer PDV-10 Operating Instructions Manual

Making Settings with the Setup Navigator

The "Setup Navigator" is a function for automatically making the player's settings by
answering questions about the disc language and the components connected to the player.
The settings made with the Setup Navigator are as follows:
• Language • Connections with the TV (TV type) • Connections with the amplifier
(digital jack, amplifier's 96 kHz compatibility)

Starting the Setup Navigator

Main unit
Remote control unit
2
2
Hint:
• The i mark indicates information. Brief
descriptions are provided after the i
mark. Refer to these descriptions if you
have any questions about the settings.
• Press the RETURN button to return to the
setup screen. When this is done, any
new settings made on the current setting
screen are canceled.
Note:
This function cannot be started during
42
playback.
En
2
1, 2
1
1
4 ¢
1 3 ¡
1
In the stop mode, press the
SETUP button, then select
"Setup Navigator" under the
"General" tab.
• For operating instructions, refer to "Setup
Screen Operations" on pages 57 to 61.
• The Setup Navigator screen is
displayed automatically.
• When "Not Used" is selected, the Setup
Navigator screen will no longer appear
when the SETUP button is pressed.
Tabs
Audio1 2 Video Language
Setup Navigator
Setup Navigator
i Setting up using the Setup Navigator
Move
2
Use the cursor buttons (5/∞)
to select "Start", then press
the ENTER button.
The Setup Navigator starts.
Audio1 2 Video Language
Setup Navigator
Language
OSD Language
i
Setup player's OSD language
Move
General Other
Start
Not Used
Select Exit
ENTER SETUP
General Other
English
français
Deutsch
Italiano
Español
Select Exit
ENTER SETUP