Turning The Display Of The Angle Mark On And Off - Pioneer PDV-10 Operating Instructions Manual

Main unit
Remote control unit
1
1, 2
4
1

Turning the display of the angle mark on and off

Set whether or not to display the
the SETUP button to display the setup screen, then operate as described under
"Making settings using the setup screen" on pages 60 and 61. Switch the
setup screen to the expert mode before making this setting. (Page 62)
Audio1 2 Video Language
TV Screen –
Picture Quality –
Still Picture –
On Screen Diplay –
OSD Position –
Angle Indicator
Move
Settings: On*
Off
2
1, 2
1
¢
3 ¡
mark on the screen during playback. Press
General Other
Off
Standard
Field
On
Normal
On
Off
Exit
SETUP
*Factory setting
Advanced Functions
Operation on the setup screen
1
From the "Other" tab on the
setup screen, select "Change
Angle", then press the cursor
button (3).
Audio1 2 Video Language
Change OSD –
Change Audio
Change Subtitle –
Change Angle
Title Search –
Chapter Search –
Move
+ / –
ENTER
2
Use the cursor buttons (5/∞)
to select the angle, then press
the ENTER button.
Angle indicator setting
• On: The mark is displayed on the
screen.
• Off: The mark is not displayed on
the screen.
This setting can be changed during
playback.
General Other
Off
1: English
1: English
2(/3)
1/1
2(/3)
3(/23)
Select Exit
SETUP
105
En