Stopping The Picture (Still Frame Mode); Switching The Still Frame Mode - Pioneer PDV-10 Operating Instructions Manual

Advanced Functions
Stopping the picture (still frame mode) - DVDs and video CDs
Main unit
Remote control unit
4 ¢
1 3 ¡
e 8 E

Switching the still frame mode

Use this function to stop the picture from shaking and achieve a clearer picture
when the DVD is set to the pause mode. Press the SETUP button to display the
setup screen, then operate as described under "Making settings using the
setup screen" on pages 60 and 61. Switch the setup screen to the expert
mode before making this setting. (Page 62)
Audio1 2 Video
TV Screen –
Picture Quality –
Still Picture
On Screen Diplay –
OSD Position –
Angle Indicator – On
Move
Settings: Field
Frame
Auto*
90
En
Play/pause
button
PLAY
PAUSE
7
Language General Other
Off
Standard
Field
Frame
Auto
Exit
SETUP
*Factory setting
Operation from the main unit
Press the play/pause button
during playback.
Operation from the remote control unit
Press the PAUSE button during
playback.
1
Hint:
• With DVDs, if the picture is shaky, switch
the pause mode setting on the setup screen
to "Field" (see below).
• Press the PLAY or PAUSE button to cancel
the still frame mode.
• Field: In this mode, shakiness of still
pictures is eliminated.
• Frame: This is the normal mode.
• Auto: The mode automatically
switches between field and frame.
This setting can be changed during
playback.
Note:
For some discs the picture may not be
clearer in the "Field" mode.