Figure 28 Add a charging policy
# Add a service.
Click the Service tab, and select User Access Manager > Service Configuration from the navigation tree
to enter the Service Configuration page. Then, click Add to enter the Add Service Configuration page
and perform the following configurations:
Add a service named Dot1x auth and set the Service Suffix to bbb, which indicates the
•
authentication domain for the 802.1X user. With the service suffix configured, you must configure
usernames to be sent to the RADIUS service to carry the domain name.
•
Specify UserAcct as the Charging Plan.
Select Deploy VLAN and set the ID of the VLAN to be assigned to 4.
•
•
Configure other parameters according to the actual situation.
Click OK to finish the operation.
•
66