Troubleshooting Pki; Failed To Retrieve A Ca Certificate; Failed To Request A Local Certificate - HP 3600 v2 Series Security Configuration Manual

[Device-pki-cert-acp-myacp] quit
Apply the SSL server policy and certificate attribute-based access control policy to HTTPS service
4.
and enable HTTPS service.
# Apply SSL server policy myssl to HTTPS service.
[Device] ip https ssl-server-policy myssl
# Apply the certificate attribute-based access control policy of myacp to HTTPS service.
[Device] ip https certificate access-control-policy myacp
# Enable HTTPS service.
[Device] ip https enable

Troubleshooting PKI

Failed to retrieve a CA certificate

Symptom
Failed to retrieve a CA certificate.
Analysis
Possible reasons include:
The network connection is not proper. For example, the network cable might be damaged or loose.
•
No trusted CA is specified.
•
The URL of the registration server for certificate request is not correct or not configured.
•
• No authority is specified for certificate request.
The system clock of the switch is not synchronized with that of the CA.
•
Solution
• Make sure that the network connection is physically proper.
Check that the required commands are configured properly.
•
• Use the ping command to check that the RA server is reachable.
Specify the authority for certificate request.
•
Synchronize the system clock of the switch with that of the CA.
•

Failed to request a local certificate

Symptom
Failed to request a local certificate.
Analysis
Possible reasons include:
The network connection is not proper. For example, the network cable might be damaged or loose.
•
No CA certificate has been retrieved.
•
The current key pair has been bound to a certificate.
•
No trusted CA is specified.
•
259