HP 3600 v2 Series Security Configuration Manual page 188

[SwitchA] radius nas-ip 192.168.0.1
NOTE:
Make sure that you have added the access device with IP address 192.168.0.1 on the RADIUS server.
• Configure the stateful failover function
# Configure the VLAN for stateful failover as VLAN 8.
[SwitchA] dhbk vlan 8
# Enable stateful failover and configure it to support the symmetric path.
[SwitchA] dhbk enable backup-type symmetric-path
Configure Switch B
3.
Configure VRRP
•
# Create VRRP group 1, and configure the virtual IP address of the VRRP group 1 as 9.9.1.1.
<SwitchB> system-view
[SwitchB] interface vlan-interface 10
[SwitchB–Vlan-interface10] vrrp vrid 1 virtual-ip 9.9.1.1
# Set the priority of VLAN-interface 10 in VRRP group 1 to 150.
[SwitchB–Vlan-interface10] vrrp vrid 1 priority 150
[SwitchB–Vlan-interface10] quit
# Create VRRP group 2, and configure the virtual IP address of the VRRP group 2 as 192.168.0.1.
[SwitchB] interface vlan-interface 20
[SwitchB–Vlan-interface20] vrrp vrid 2 virtual-ip 192.168.0.1
# Set the priority of VLAN-interface 20 in VRRP group 2 to 150.
[SwitchB–Vlan-interface20] vrrp vrid 2 priority 150
[SwitchB–Vlan-interface20] quit
Configure a RADIUS scheme
•
# Create RADIUS scheme rs1 and enter its view.
[SwitchB] radius scheme rs1
# Configure the server type for the RADIUS scheme. When using the iMC server, configure the RADIUS
server type as extended.
[SwitchB-radius-rs1] server-type extended
# Specify the primary authentication server and primary accounting server, and configure the keys for
communication with the servers.
[SwitchB-radius-rs1] primary authentication 192.168.0.111
[SwitchB-radius-rs1] primary accounting 192.168.0.111
[SwitchB-radius-rs1] key authentication expert
[SwitchB-radius-rs1] key accounting expert
# Configure the access device to not carry the ISP domain name in the username sent to the RADIUS
server. (Optional, configure the username format as needed.)
[SwitchB-radius-rs1] user-name-format without-domain
[SwitchB-radius-rs1] quit
Configure an authentication domain
•
# Create ISP domain dm1 and enter its view.
[SwitchB] domain dm1
177