HP 3600 v2 Series Security Configuration Manual page 69

Click the Service tab, and select User Access Manager > Service Configuration from the navigation tree
to enter the Service Configuration page. Then, click Add to enter the Add Service Configuration page
and perform the following configurations:
Add a service named Portal-auth/acct and set the Service Suffix to dm1, which indicates the
•
authentication domain for the portal user. With the service suffix configured, you must configure the
usernames to be sent to the RADIUS server to carry the domain name.
Specify UserAcct as the Charging Plan.
•
• Configure other parameters according to the actual situation.
Click OK to finish the operation.
•
Figure 19 Add a service
# Add a user.
Click the User tab, and select All Access Users from the navigation tree to enter the All Access Users page.
Then, click Add to enter the Add Access User page and perform the following configurations:
• Select the user or add a user named hello
Specify the account name as portal and configure the password
•
• Select the access service Portal-auth/acct
Configure other parameters accordingly and click OK to finish the operation
•
58