HP 3600 v2 Series Security Configuration Manual page 107

With 802.1X authentication, a hybrid port is always assigned to a VLAN as an untagged member.
•
After the assignment, do not re-configure the port as a tagged member in the VLAN.
Use Table 6
•
Table 6 Relationships of the 802.1X guest VLAN and other security features
Feature
Super VLAN
MAC authentication guest VLAN
on a port that performs
MAC-based access control
802.1X Auth-Fail VLAN on a port
that performs MAC-based access
control
Port intrusion protection on a port
that performs MAC-based access
control
Configuration prerequisites
Create the VLAN to be specified as the 802.1X guest VLAN.
•
• If the 802.1X-enabled port performs port-based access control, enable 802.1X multicast trigger.
If the 802.1X-enabled port performs MAC-based access control, configure the port as a hybrid port,
•
enable MAC-based VLAN on the port, and assign the port to the 802.1X guest VLAN as an
untagged member. For more information about the MAC-based VLAN function, see Layer 2
Switching Configuration Guide.
Configuration procedure
Follow these steps to configure an 802.1X guest VLAN:
To do...
Enter system view
Configure an
802.1X guest
VLAN for one
or more ports
when configuring multiple security features on a port.
Relationship description
You cannot specify a VLAN as both a super
VLAN and an 802.1X guest VLAN.
Only the 802.1X guest VLAN take effect. A
user that fails MAC authentication will not
be assigned to the MAC authentication
guest VLAN.
The 802.1X Auth-Fail VLAN has a higher
priority
The 802.1X guest VLAN function has
higher priority than the block MAC action
but lower priority than the shut down port
action of the port intrusion protection
feature.
Use the command...
system-view
dot1x guest-vlan guest-vlan-id
In system view
[ interface interface-list ]
interface interface-type
interface-number
In Ethernet
interface view
dot1x guest-vlan guest-vlan-id
96
Reference
See the chapter "Super
VLAN configuration" in
Layer 2 LAN Switching
—
Configuration Guide
See the chapter "MAC
authentication
configuration"
See "Using 802.1X
authentication with other
features"
See the chapter "Port
security configuration"
Remarks
—
Required
Use either approach.
By default, no 802.1X guest VLAN
is configured on any port.
LAN
—