HP 3600 v2 Series Security Configuration Manual page 263

In this example, configure basic attributes including the Nickname and Subject DN on the CA server at
first. The Nickname indicates the name of the trusted CA. The Subject DN is the DN information of the
CA, including the Common Name (CN), Organization Unit (OU), Organization (O), and Country (C).
The other attributes might be left using the default values.
# Configure extended attributes.
After configuring the basic attributes, perform configuration on the jurisdiction configuration page of the
CA server. This includes selecting the proper extension profiles, enabling the SCEP autovetting function,
and adding the IP address list for SCEP autovetting.
# Configure the CRL distribution behavior.
After completing the configuration, you must perform CRL related configurations. In this example, select
the local CRL distribution mode of Hypertext Transfer Protocol (HTTP) and set the HTTP URL to
http://4.4.4.133:447/myca.crl.
After the configuration, make sure that the system clock of the switch is synchronous to that of the CA, so
that the switch can request certificates and retrieve CRLs properly.
Configure the switch
2.
Configure the entity DN
•
# Configure the entity name as aaa and the common name as device.
<Device> system-view
[Device] pki entity aaa
[Device-pki-entity-aaa] common-name device
[Device-pki-entity-aaa] quit
Configure the PKI domain
•
# Create PKI domain torsa and enter its view.
[Device] pki domain torsa
# Configure the name of the trusted CA as myca.
[Device-pki-domain-torsa] ca identifier myca
# Configure the URL of the registration server in the format of http://host:port/Issuing Jurisdiction ID,
where Issuing Jurisdiction ID is a hexadecimal string generated on the CA server.
[Device-pki-domain-torsa]
http://4.4.4.133:446/c95e970f632d27be5e8cbf80e971d9c4a9a93337
# Set the registration authority to CA.
[Device-pki-domain-torsa] certificate request from ca
# Specify the entity for certificate request as aaa.
[Device-pki-domain-torsa] certificate request entity aaa
# Configure the URL for the CRL distribution point.
[Device-pki-domain-torsa] crl url http://4.4.4.133:447/myca.crl
[Device-pki-domain-torsa] quit
Generate a local key pair using RSA
•
[Device] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits in the modulus [default = 1024]:
certificate
252
request url