Follow these steps to configure the portal user information synchronization function:
To do...
Enter system view
Configure the portal user
information synchronization
function
NOTE:
The user information synchronization function requires that a portal server supports the portal user
•
heartbeat function. Only the iMC portal server supports the portal user heartbeat function. To implement
the portal user synchronization function, you also need to configure the user heartbeat function on the
portal server and make sure that the product of interval and retry is greater than or equal to the portal
user heartbeat interval. HP recommends configuring the interval to be greater than the portal user
heartbeat interval configured on the portal server.
For redundant user information on the device—information for users who are considered nonexistent on
•
the portal server, the device deletes the information during the (N+1)th interval, where N is equal to the
value of
Logging off portal users
Logging off a user terminates the authentication process for the user or removes the user from the
authenticated users list.
Follow these steps to log off users:
To do...
Enter system view
Log off users
Displaying and maintaining portal
To do...
Display the ACLs on an interface
retries
configured in the portal server user-sync command.
Use the command...
system-view
portal server server-name user-sync
[ interval interval ] [ retry retries ]
Use the command...
system-view
portal delete-user { ip-address | all
| interface interface-type
interface-number }
Use the command...
display portal acl { all | dynamic |
static } interface interface-type
interface-number [ | { begin |
exclude | include }
regular-expression ]
155
Remarks
—
Required
Not configured by default.
The portal server specified in the
command must exist. This function
can take effect only when the
specified portal server is
referenced on the interface
connecting the users.
Remarks
—
Required
Remarks
Available in any view