Log in to the iMC management platform and select the Service tab. Then, select User Access Manager >
Portal Service Management > Server from the navigation tree to enter the portal server configuration
page, as shown in
Figure
Configure the portal server parameters as needed. This example uses the default settings.
•
Figure 73 Portal server configuration
# Configure the IP address group.
Select User Access Manager > Portal Service Management > IP Group from the navigation tree to enter
the portal IP address group configuration page. Then, click Add to enter the page shown in
Type the IP group name.
•
Type the start IP address and end IP address of the IP group. Make sure that the host IP address is
•
in the IP group.
Select a service group. By default, the group Ungrouped is used.
•
•
Select the IP group type Normal.
Figure 74 Add an IP address group
73.
173
Figure
63.