To do...
Establish a
connection
between the
SSH client and
the server, and
specify the
public key
algorithm,
preferred
encryption
algorithm,
preferred
HMAC
algorithm and
preferred key
exchange
algorithm
Displaying and maintaining SSH
To do...
Display the source IP address or
interface set for the SFTP client
Display the source IP address or
interface information on an SSH
client
Display SSH server status
information or session information
on an SSH server
Display the mappings between
SSH servers and their host public
keys on an SSH client
Display information about SSH
users on an SSH server
Display the public keys of the local
key pairs
Display the public keys of the SSH
peers
NOTE:
For more information about the display public-key local and display public-key peer commands, see
Security Command Reference
Use the command...
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa |
rsa } | prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 |
For an IPv4 server
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des
| aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
ssh2 ipv6 server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 |
des } | prefer-ctos-hmac { md5 | md5-96
For an IPv6 server
| sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des
| aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
Use the command...
display sftp client source [ | { begin
| exclude | include }
regular-expression ]
display ssh client source [ | { begin
| exclude | include }
regular-expression ]
display ssh server { status |
session } [ | { begin | exclude |
include } regular-expression ]
display ssh server-info [ | { begin |
exclude | include }
regular-expression ]
display ssh user-information
[ username ] [ | { begin | exclude |
include } regular-expression ]
display public-key local { dsa |
rsa } public [ | { begin | exclude |
include } regular-expression ]
display public-key peer [ brief |
name publickey-name ] [ | { begin
| exclude | include }
regular-expression ]
.
282
Remarks
Required
Use either command in
user view.
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view