KTI Networks KGS-1064-HP User Manual page 29

Flow Control – Configured Click to enable flow control for fixed speed settings.
Maximum Frame Size
Excessive Collision Mode Configure port transmission collision behavior.
Power Control
Link Alarm
Save
Reset
Refresh
When "Auto" Speed is selected for a port, this selection indicates the flow control
capability that is advertised to the link partner.
Enter the maximum frame size allowed for the switch port, including FCS.
The allowed range is 1518 bytes to 9600 bytes.
Discard: Discard frame after 16 collisions (default).
Restart: Restart back-off algorithm after 16 collisions.
The configured column allows for changing the power savings mode parameters per
port.
Disabled: All power savings mechanisms are disabled.
ActiPHY: Link down power savings is enabled.
PerfectReach: Link up power savings is enabled.
Enabled: Both link up and link down power savings are enabled.
Port link fault alarm relay configuration
Click to enable relay alarm function for the port
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
Click to refresh the page. Any changes made locally will be undone.
-29-