Sflow - KTI Networks KGS-1064-HP User Manual

3.14 sFlow

Status
Owner
IP Address/Hostname
Timeout
Tx Successes
Tx Errors
Flow Samples
Counter Samples
Description
This field shows the current owner of the sFlow configuration. It assumes one of
three values as follows:
• If
sFlow is currently unconfigured/unclaimed, Owner contains <none>.
• If sFlow is currently configured through Web or CLI, Owner contains <Configured
through local management>.
• If sFlow is currently configured through SNMP, Owner contains a string identifying
the sFlow receiver.
The IP address or hostname of the sFlow receiver.
The number of seconds remaining before sampling stops and the current sFlow owner
is released.
The number of UDP datagrams successfully sent to the sFlow receiver.
The number of UDP datagrams that has failed transmission.
The most common source of errors is invalid sFlow receiver IP/hostname
configuration. To diagnose, paste the receiver's IP address/hostname into the Ping
Web page (Diagnostics → Ping/Ping6).
The total number of flow samples sent to the sFlow receiver.
The total number of counter samples sent to the sFlow receiver.
-207-