KTI Networks KGS-1064-HP User Manual page 123

Aging Time
Traffic Class
Port Mode
Port Security
Port Discovery Protocol Indicates the Voice VLAN port discovery protocol. It will only work when auto
Save
Reset
cannot equal each port PVID. It is a conflict in configuration if the value equals
management VID, MVR VID, PVID etc. The allowed range is 1 to 4095.
Indicates the Voice VLAN secure learning aging time. The allowed range is 10 to
10000000 seconds. It is used when security mode or auto detect mode is enabled. In
other cases, it will be based on hardware aging time. The actual aging time will be
situated between the [age_time; 2 * age_time] interval.
Indicates the Voice VLAN traffic class. All traffic on the Voice VLAN will apply
this class.
Indicates the Voice VLAN port mode.
When the port mode isn't equal disabled, we must disable MSTP feature before we
enable Voice VLAN. It can avoid the conflict of ingress filtering.
Possible port modes are:
Disabled: Disjoin from Voice VLAN.
Auto: Enable auto detect mode. It detects whether there is VoIP phone attached to the
specific port and configures the Voice VLAN members automatically.
Forced: Force join to Voice VLAN.
Indicates the Voice VLAN port security mode. When the function is enabled, all
non-telephonic MAC addresses in the Voice VLAN will be blocked for 10 seconds.
Possible port modes are:
Enabled: Enable Voice VLAN security mode operation.
Disabled: Disable Voice VLAN security mode operation.
detect mode is enabled. We should enable LLDP feature before configuring
discovery protocol to "LLDP" or "Both". Changing the discovery protocol to "OUI"
or "LLDP" will restart auto detect process. Possible discovery protocols are:
OUI: Detect telephony device by OUI address.
LLDP: Detect telephony device by LLDP.
Both: Both OUI and LLDP.
Click to save the changes.
Click to undo any changes made locally and revert to previously saved values.
-123-