Lldp; Neighbours - KTI Networks KGS-1064-HP User Manual

3.10 LLDP

3.10.1 Neighbours

Status
Local Port
Chassis ID
Port ID
Port Description
System Name
System Capabilities
Management Address
Description
The port on which the
The Chassis ID is the identification of the neighbor's LLDP frames.
The Port ID is the identification of the neighbor port.
Port Description is the port description advertised by the neighbor unit.
System Name is the name advertised by the neighbor unit.
System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address is the neighbor unit's address that is used for higher layer
entities to assist discovery by the network management. This could for instance hold
the neighbor's IP address.
LLDP frame was received.
-193-