JVC RX-DV31SL Service Manual page 20

Home theater dvd-audio/video receiver

Hide thumbs Also See for RX-DV31SL:

Enlarged version

3.3.11 Removing the feed motor

(See Figs.15 to 17)

• Remove the DVD servo board.

• Remove the clamper base.

• Remove the DVD traverse mechanism assembly.

(1) From the top side of the DVD traverse mechanism assem-

bly, remove the feed motor wire that is soldered to the spin-

dle motor board. (See Fig.15.)

(2) Remove the two screws H attaching the feed holder as-

sembly and then take out the feed holder assembly. (See

Fig.15.)

(3) Remove the screw J attaching the thrust spring. (See

Fig.16.)

(4) Remove the feed gear and lead screw in the direction of the

arrow. (See Fig.16.)

(5) Remove the two screws K attaching the feed motor. (See

Fig.17.)

1-20 (No.22023)

Spindle motor board

DVD traverse mechanism assembly

Fig.15

Lead screw

Thrust spring

Fig.16

Feed holder assembly

Fig.17

Remove the solders.

Feed holder

assembly

Feed motor

wire

Feed motor

Feed holder assembly

Feed motor

Feed gear

Table of Contents