Configuration For Router Mode - TP-Link TL-WR843N User Manual

3.2.1

Configuration for Router Mode

When you choose Standard Wireless Router on Working Mode page as shown in Figure 3-6 ,
take the following steps:
1. Click Next, and then WAN Connection Type page will appear as shown in Figure 3-7.
The Router provides Auto-Detect function and supports five popular ways Dynamic IP, Static
IP, PPPOE/Russian L2TP, L2TP/Russian L2TP and PPTP/Russian PPTP to connect to the
Internet. It's recommended that you make use of the Auto-Detect function. If you are sure of
what kind of connection type your ISP provides, you can select the very type and click Next to
continue configuring.
2. If you select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is successfully
detected by the Router.
1) If the connection type detected is Dynamic IP, the next screen will appear as shown in
Figure 3-8. MAC Clone is necessary for most users using Cable Modem. It's highly
recommended to do this on the MAIN COMPUTER that was originally connected to your
Cable Modem.
TL-WR843N 300Mbps Wireless AP/Client Router User Guide
Figure 3-7 WAN Connection Type
- 14 -