Konica Minolta BIZHUB 501 Copy Operations page 463

Utility mode
Reset Settings
Parameter
System Auto Reset
Auto Reset
Job Reset
System Auto Reset for Proof Copy
Reminder
Even if the System Auto Reset Time is [OFF], the System Auto Reset function is activated after 1 minute
of no operation of the machine during the User Authentication or Account Track. However, when in the
Enlarge Display mode, the System Auto Reset function is not activated.
If user authentication settings have been specified or "Enhanced Security Mode" has been set to "ON",
the logoff from Administrator mode or user authentication mode will be performed according to the
"System Auto Reset Time" parameter.
With an optional i-Option LK-101 registered to MFP, the machine allows you to select Application
Menu, Fax/Scan, or Copy as the mode to be entered after System Auto Reset is activated.
With an optional LK-101 registered to MFP, the machine also provides "Web Browser" settings.
For i-Option LK-101, the System Auto Reset Time is set to 1 minute as factory default.
bizhub 501/421/361 (Version 2)
Description
Specify the desired length of time until the auto-
matic system reset operation is performed.
• Priority Mode:
Select the setting ("User Box", "Scan/Fax" or
"Copy") for the mode that the machine enters
when the automatic system reset operation is
performed.
• System Auto Reset Time:
Specify the setting (between 1 minute and
9 minutes or "OFF") for the desired length of
time until the automatic system reset opera-
tion is performed.
Select the setting (between 1 minute and 9 min-
utes or "OFF") for the desired length of time until
the automatic panel reset operation is performed
for each mode (Copy, Scan/Fax and User Box).
When Account is Select whether or not the settings are reset (initial-
changed ized) when the user has changed.
This machine detects that the user has changed
when the optional key counter has been removed
or when the user has logged off if user authentica-
tion or account track settings are specified.
When original Select whether or not the settings are reset when
is set on ADF an original is loaded into the automatic document
feeder.
Next Job Staple Setting:
Select whether the same Staple setting from the
previous job is set or the setting is canceled when
that job begins and the settings for the next job
can be specified.
Original Set/Bind Direction:
Select whether the same Original Direction and
Binding Position settings from the previous job
are set or the settings are canceled when that job
begins and the settings for the next job can be
specified.
Reset Data After Job:
Select whether or not to reset the address and
other settings after scanning or fax transmission.
When "Confirm with User"
or not to hold the address and other settings can
be selected after scanning or fax transmission.
*
If "Confirm Address (TX)" has been set to "ON",
"Confirm with User" will be unavailable.
Select whether or not to activate the automatic
system reset after the proof copy operation is per-
formed.
Default Setting
Priority Mode:
Copy
System Auto Reset
Time: 1 Minute
Copy: 1 Minute
Scan/Fax: 1 Minute
User Box: 1 Minute
Reset
Do Not Reset
OFF
OFF
Reset All
*
is specified, whether
No
12
12-31