Konica Minolta BIZHUB 501 Copy Operations page 402

9
6
Remove the lock tape from the cartridge.
7
Return the staple holder to the stapler.
– Hold the staple holder as shown right.
– While keeping the saddle stitcher tray open, push in the
staple holder to its original position, then pull it up until it
clicks in place.
– Gently return the saddle stitcher tray to its original position.
8
Open the stapling part of the saddle stitcher, then close it.
The saddle stitcher will be reset, and the copying job using
Fold & Staple mode will be available.
9-18
Replacing toner cartridges and staple cartridges and emptying punch scrap box
bizhub 501/421/361 (Version 2)