Konica Minolta BIZHUB 501 Copy Operations page 451

Utility mode
Note
[Low Power Mode Settings] appears only if the "Administrator Security Levels" parameter in
Administrator mode is set to [Level 1], [Level 2].
!
Detail
For details on the "Administrator Security Levels" parameter, refer to "Security Settings" on
page 12-38.
Output Settings
Parameter
Print/Fax Output Settings
Output tray setting
Bin Assignment
*1
If optional separator is installed, "Tray 2" is selected as the factory default.
*2
If optional separator is installed, "Tray 1" is selected as the factory default.
*3
If an additional output tray is installed on Finisher FS-522, "Tray 3" is selected as the factory default.
Note
The "Output tray settings" parameter is available only if the optional finisher or separator is installed.
When an additional output tray is installed optionally, the additional output tray is assigned as Tray 2,
and Tray 2 is assigned as Tray 3, in "Output Tray Setting".
[Bin Assignment] only appears if the optional mailbin kit is installed.
Blank Page Print Settings
Description
Select whether or not stamps and overlays are printed on blank pages.
Density for Original Type
Description
Shift the exposure level darker/lighter within 6 levels for each original type, which will be
reflected to 9 levels of the Density setting available on the Basic screen.
bizhub 501/421/361 (Version 2)
Description
Specify settings for faxing and printing. For details, refer to the User manual – Network
Scan/Fax/Network Fax Operations and the User manual – Print Operations.
Select the copy output tray for each
type of job (copies, printouts, re-
ports and faxes).
Select whether or not Tray 1 is
specified as mailbin 5 and the op-
tional output tray is specified as
mailbin 6.
Default Setting
*1
Copy: Tray 1
*1
Print: Tray 1
*2*3
Print Reports: Tray 2
*2*3
Fax: Tray 2
Not Set
Default Setting
Do Not Print
Default Setting
Text: 4
Text/Photo: 4
Photo: 4
Dot Matrix Original: 4
12
12-19