Charging the Battery (Series A)
Charging the Battery (Series A)
Battery charger is for indoor use only. Do not expose
charger to rain or snow. Charge battery with
Graco-approved charger.
NOTE: Fully charge battery prior to first use.
1. Place field marker in a dry, well-ventilated area
away from flammable or combustible materials,
including paints and solvents.
2. Before charging, make sure spray button (A) is out
(OFF position).
A
3. Plug charger into an electrical outlet.
Charger Indicator Lights
Appearance
RED
Battery is being charged.
GREEN
Charging is complete.
NOTE: Disconnect charger from field marker after battery is fully charged. Charge times will vary from 0 - 14 hours
depending on level of discharge.
NOTE: Green light on charger will be ON if:
•
Charging is complete.
•
Charger is NOT plugged into electrical outlet but is plugged into battery charger connection port on field marker.
•
Charger is plugged into electrical outlet but is NOT plugged into battery charger connection port on field marker.
8
ti20194a
ti2810a
4. Plug 12V charger jack into battery connection port
(C) on field marker.
C
ti20190a
5. When charging is complete, disconnect charger
from electrical outlet. Then disconnect charger from
battery connection port on field marker.
Description
ti7949a
332119E