Pump/Motor Removal
Removal
1. Perform Pressure Relief Procedure, page 10.
ti20183a
2. Disconnect motor plug (N).
ti21484a
3. Use wrench to disconnect hose to material
dispenser.
4. Remove paint hopper (S).
S
5. Remove six torx screws on motor shroud. Remove
motor shroud.
332119E
N
ti21363a
ti21373a
6. Disconnect motor wires and remove power cord.
ti21374a
7. Use wrench to remove bulkhead nut.
ti21377a
8. Loosen hose clamp below paint hopper.
ti21376a
9. Remove four screws from paint hopper bracket.
10. Remove paint hopper (S) from pump/motor assembly.
ti21389a
ti21375a
S
Repair
25