Common Procedures; Prime/Spray Valve; Pressure Relief Procedure; Install Spray Tip/Guard - Graco 24N950 Operation - Repair - Parts

Common Procedures

Common Procedures

Prime/Spray Valve

ti20183a
UP position
(For priming and releasing
ti14999a
pump pressure)
Follow the Pressure Relief Procedure
whenever you see this symbol.

Pressure Relief Procedure

Do not operate or spray near children. Do not aim the
field marker at, or spray any person or animal. Keep
hands and other body parts away from the discharge.
For example, do not try to stop the paint flow with any
part of the body.
This field marker builds up an internal pressure of
1200 psi (8.3 MPa, 83 bar) during use. Follow this
Pressure Relief Procedure whenever you stop
spraying and before cleaning, checking, servicing, or
transporting equipment to prevent serious injury.
1. Put prime/spray valve (D) UP to release pressure.
D
ti20183a
10
ti20184a
DOWN position
(Ready to spray)

Install Spray Tip/Guard

Assembly (if not installed)

Perform the Pressure Relief Procedure before
installing spray tip/guard assembly.
1. Put prime/spray valve (D) UP to release pressure.
D
ti20183a
Do NOT place hands in front of tip.
2. Screw spray/tip guard assembly (G) onto field marker.
Tighten retaining nut until completely engaged with
field marker. Do not overtighten nut.
ti20215a
G
ti14997a
332119E