Reversible Spray Tip
Always perform Pressure Relief Procedure before
adjusting spray tip position.
In the event that particles or debris clog the spray tip,
this field marker is designed with a reversible spray tip
that can be used to quickly and easily clear the particles
and resume spraying as quickly as possible.
•
Always point the reversible spray tip down when
spraying.
•
When particles or debris get caught in the tip, it can
be reversed to quickly clean the tip.
•
Only operate field marker with spray tip in forward or
reversed position.
ti20191a
Spray Tip Forward
Spray Tip Reversed
(UNCLOG position)
(SPRAY position)
332119E
ti20192a
ti21416a
Filter Removal / Cleaning
Always perform Pressure Relief Procedure before
removing filter.
1.
Perform Pressure Relief Procedure, page 10.
ti20183a
2. Unscrew to remove filter.
ti20182a
3. Pull out filter (F).
F
ti20185a
4. Clean filter with water. Replace filter if damaged or
unable to clean.
5. Reinstall filter.
6. Install and tighten filter housing.
Common Procedures
11