Downloading Results to PC
To download your test results to a PC:
1.
Using the cable provided, connect the infrared adapter to an unused COM
port on your PC.
2.
Run the Quicklink software on your PC and click on the download icon.
O
3.
Press
to turn on the Meter.
4.
Specify the PC COM port you are using on the Quicklink download dialog.
5.
Click the "start" to initiate the download.
The download dialog shows the progress of the download as test results are
received on the PC.
If errors are reported, repeat the download procedure.
Verify that the download was successful before deleting the stored test
results on the Fluke 1550B.
Results data stored in the Meter can be deleted from the PC using the
Quicklink application. See the Quicklink Help file for details.
Deleting Your Test Results
To delete all of the saved test results:
1.
With the Meter turned on, press
e
2.
Press
to access the stored test results.
H
once to access the DELETE? function.
3.
Press
V
. The REALLY DEL? prompt appears.
4.
Press
d
5.
Press
to confirm the deletion or press
mode.
When you press
Individual test locations cannot be deleted, however, they can be
overwritten.
The delete function deletes all of your stored test results.
Note
Note
H
d
, all stored test results are permanently deleted.
Note
W
Caution
Downloading Your Test Results
to select the RESULTS function.
e
to return to Test Voltage
MegOhmMeter
19