Bridge - D-Link DAP-1665 User Manual

Section 3 - Configuration
Wireless Mode: Select Bridge from the drop-down menu.
Status: Click to enable the wireless function for the 2.4 GHz band. If
you do not want to use wireless, uncheck the box to disable all
wireless functions.
Wi-Fi Name
Specify a network name (SSID) to identify the 2.4 GHz network.
(SSID):
This is the network name that wireless clients will search for
when connecting to your wireless network.
Password:
Enter a custom password for this network.
Advanced Settings:
802.11 Mode:
Select one of the following:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Wi-Fi Channel:
Choose from channels 1-11 for an existing wireless network or
to reduce interference in congested areas.
The Auto setting can be selected to allow the DAP-1665 to
automatically choose the channel with the least amount of
interference.
Channel Width:
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
D-Link DAP-1665 User Manual

Bridge

Existing Network
2.4 GHz Bridge Wi-Fi
49