Bridge Mode; Bridge Mode - D-Link DAP-1360 User Manual

Section 2 - Installation
In the Bridge mode, the DAP-1360 wirelessly connects seperate local area networks (LANs) that can't easily be connected
together with a cable. For example, if there are two wired LANs separated by a small courtyard, it would be expensive to bury
cables to connect between the two sides together. A better solution is to use two DAP-1360 units to wirelessly connect the
two LANs. In the Bridge mode, both DAP-1360 units do not act as APs.
Note: The Bridge mode is not specified in the Wi-Fi or IEEE standards. This mode will only work using two DAP-1360 units.
Communication with other APs (even other D-Link APs) is not guaranteed.
D-Link DAP-1360 User Manual

Bridge Mode

Connecting Two Separate LANs Together Through Two DAP-1360 Units
16