System - D-Link DAP-1665 User Manual

Section 3 - Configuration
You can save your DAP-1665's settings to a file as a backup from this page.
Save Settings to Click Save to save the access point's current configuration to
Local Hard Drive:
a file on your local computer. After clicking, a Save File dialog
will appear, prompting you to save the configuration file on
your computer.
Load Settings Click Browse to locate a previously saved configuration file
From Local Hard
on your local computer. Once the file has been located, click
Drive: Upload Settings to apply the configuration in the file to the
access point.
Note: This will overwrite any current configuration.
Restore to Click Restore Device to reset the DAP-1665's settings to the
Factory Default
factory defaults.
Settings: Warning: This will erase all current settings and cannot be
undone.
Reboot the Click Reboot to reboot the device. You will need to log in to the
Device: device again once the reboot has been completed.
D-Link DAP-1665 User Manual

System

73