D-Link DAP-1665 User Manual page 56

Section 3 - Configuration
If you have added a rule under Management >> Schedule, click
Schedule:
on the drop-down menu to choose whether the device will
be Always Enable or choose from the name of your custom
schedule. Click Save to store the setting and the device will
reboot to activate the selected schedule.
Status: Click to enable the wireless function for the 5 GHz band. If you
do not want to use wireless, uncheck the box to disable all
wireless functions.
Wi-Fi Name Specify a network name (SSID) to identify the 5 GHz network.
(SSID): This is the network name that wireless clients will search for
when connecting to your wireless network.
Password: Enter a custom password for this network.
Advanced Settings:
Security Select the type of wireless security you wish to use for the
Mode: extended network. Choose from WPA/WPA2-Personal/WPA/
WPA2-Enterprise/None.
802.11 Select one of the following:
Mode: 802.11a Only - Select if you are only using 802.11a wireless
clients.
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11a/n - Select if you are using a mix of 802.11n and
802.11a wireless clients.
802.11ac Only - Select if you are only using 802.11ac wireless
clients.
Mixed 802.11n/ac - Select if you are using a mix of 802.11ac
and 802.11n wireless clients.
Mixed 802.11a/n/ac - Select if you are using a mix of 802.11ac,
802.11n, and 802.11a wireless clients.
Wi-Fi Choose a channel from the drop-down menu for an existing
Channel: wireless network or to reduce interference in congested areas.
Transmission Depending on your wireless reception and coverage area, you
Power: can choose between Low, Medium, or High power.
D-Link DAP-1665 User Manual
5 GHz Extended Wi-Fi
55