D-Link DAP-1665 User Manual page 55

Section 3 - Configuration
Status: Click to enable the wireless function for the 2.4 GHz band. If
you do not want to use wireless, uncheck the box to disable all
wireless functions.
Wi-Fi Name Specify a network name (SSID) to identify the 2.4 GHz network.
(SSID): This is the network name that wireless clients will search for
when connecting to your wireless network.
Password: Enter a custom password for this network.
Advanced Settings:
802.11 Mode: Select one of the following:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Wi-Fi Channel:
Choose from channels 1-11 for an existing wireless network or
to reduce interference in congested areas.
Transmission
Depending on your wireless reception and coverage area, you
Power: can choose between Low, Medium, or High power.
Channel Width:
Select the Channel Width:
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
HT20/40
Enable or disable HT20/40 coexistence by toggling the slider.
Coexistence:
Enabling this feature helps with device compatibility depending
on their 802.11 version.
Visibility Status:
Select whether you would like the network name (SSID) of your
wireless network to be Visible or Invisible to wireless clients.
If Invisible, the SSID of the DAP-1665 will not be seen by site
survey utilities, so wireless clients will have to manually enter
the SSID of your wireless network in order to connect to it.
D-Link DAP-1665 User Manual
2.4 GHz Extended Wi-Fi
54