Introduction - D-Link DAP-1665 User Manual

Section 1 - Product Overview

Introduction

D-Link introduces the new D-Link DAP-1665 AC1200 Wi-Fi Range Extender/Access Point. With a maximum combined wireless
signal rate of up to 1200 Mbps , the DAP-1665 expands high-speed wireless network access for your home or office.
1
The DAP-1665 is compliant with the latest draft IEEE 802.11ac standard, which features beamforming and MU-MIMO for better
wireless performance. The DAP-1665 is also backward-compatible with 802.11n/g/b/a devices so older devices can easily
integrate into your network. The access point has the flexibility to operate in 5 different modes: Access Point, Wireless Client,
Bridge, Bridge with AP, Repeater, WISP Client, and WISP Repeater. Its easy-to-use setup wizard makes sure that you will
be connected to a wireless network in minutes.
The DAP-1665 features Wi-Fi Protected Access (WPA-PSK/WPA2-PSK) to provide an enhanced level of security for wireless data
communications. The DAP-1665 also includes convenience features to keep your wireless connection safe from unauthorized
access. Finally, Wi-Fi Protected Setup (WPS) lets you easily set up your device in any mode by simply pressing a button.
Maximum wireless signal rate derived from draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of
1
traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Wireless
range and speed rates are D-Link RELATIVE performance measurements based on the wireless range and speed rates of a standard Wireless N product from D-Link.
D-Link DAP-1665 User Manual 6