D-Link DAP-1665 User Manual page 46

Section 3 - Configuration
Advanced Settings:
Security
Select the type of wireless security you wish to use for the
Mode: extended network. Choose from WPA/WPA2-Personal/WPA/
WPA2-Enterprise/None.
802.11 Mode:
Select one of the following:
802.11n Only - Select if you are only using 802.11n wireless
clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of
802.11n and 802.11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using
a mix of 802.11n, 802.11g, and 802.11b wireless clients.
Wi-Fi Channel: Choose from channels 1-11 for an existing wireless network or
to reduce interference in congested areas.
The Auto setting can be selected to allow the DAP-1665 to
automatically choose the channel with the least amount of
interference.
Transmission Depending on your wireless reception and coverage area, you
Power: can choose between Low, Medium, or High power.
Channel Select the Channel Width:
Width: Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20 MHz - Select if you are not using any 802.11n wireless clients.
HT20/40 Enable or disable HT20/40 coexistence by toggling the slider.
Coexistence: Enabling this feature helps with device compatibility depending
on their 802.11 version.
Visibility Select whether you would like the network name (SSID) of your
Status: wireless network to be Visible or Invisible to wireless clients.
If Invisible, the SSID of the DAP-1665 will not be seen by site
survey utilities, so wireless clients will have to manually enter
the SSID of your wireless network in order to connect to it.
Schedule: If you have added a rule under Management >> Schedule, click
on the drop-down menu to choose whether the device will
be Always Enable or choose from the name of your custom
schedule. Click Save to store the setting and the device will
reboot to activate the selected schedule.
D-Link DAP-1665 User Manual 45