D-Link DAP-1665 User Manual page 62

Section 3 - Configuration
Wi-Fi
Choose a channel from the drop-down menu for an existing
Channel:
wireless network or to reduce interference in congested areas.
Transmission
Depending on your wireless reception and coverage area, you
Power: can choose between Low, Medium, or High power.
Channel
Select the Channel Width:
Width: Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20/40/80 MHz - Select if you are not using any 802.11n wireless
clients.
Visibility
Select whether you would like the network name (SSID) of your
Status: wireless network to be Visible or Invisible to wireless clients.
If Invisible, the SSID of the DAP-1665 will not be seen by site
survey utilities, so wireless clients will have to manually enter
the SSID of your wireless network in order to connect to it.
Schedule:
If you have added a rule under Management >> Schedule, click
on the drop-down menu to choose whether the device will
be Always Enable or choose from the name of your custom
schedule. Click Save to store the setting and the device will
reboot to activate the selected schedule.
Wi-Fi Enable WPS-PBC status if you wish to allow push button
Protected
connections to this device.
Setup: Unlocked enables the use of the PIN method for Wi-Fi Protected
Setup (WPS).
User Limit: Enable this function and enter a number in the Maximum
User Client box to limit the amount of client connections to
this device.
D-Link DAP-1665 User Manual 61