Bridge - D-Link DAP-1160 User Manual

Section 2 - Configuration
Bridge wireless mode connects 2 LANs together.
Wireless
The Wireless Network Name is a unique
Network Name
name that identifies a network. All devices
(also called the
on a network must share the same wireless
SSID):
network name in order to communicate on the
network. If you decide to change the wireless
network name from the default setting, enter
your new wireless network name in this
field.
:
This button is unavailable in Bridge mode.
Site Survey
Wireless
All devices on the network must share the
Channel:
same channel.
Enable Auto
This option is unavailable in Bridge mode.
Channel scan:
Enable Hidden
This option is unavailable in Bridge mode.
Wireless:
Remote AP MAC:
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Bridge Security:
Select None to disable encryption to across the network. Select WEP 64bits or WEP 128bits to limit communication to
only those devices that share the same WEP settings. Select WPA-PSK or WPA2-PSK to secure your network using a
password and dynamic key changes (No RADIUS server required).
Note: Bridge Mode is not completely specified in WiFi or IEEE standards. It can work with other DAP-1160 units. Communication with other APs (even other D-Link
APs) is not guaranteed.
D-Link DAP-1160 User Manual

Bridge

14