Resolve A Subnet Conflict To Access The Switch - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E

Resolve a Subnet Conflict to Access the Switch

If you power on the switch before you connect it to a network that includes a DHCP server, the switch uses
its own default IP address of 192.168.0.239. This subnet might be different from the subnet used in your
network.You might see the following message if you try to use the ProSAFE Plus Utility to access the switch:
The switch and manager IP address are not in the same subnet.
To resolve this subnet conflict:
1. Disconnect the Ethernet cable between the switch and your network.
2. Unplug the switch's power cord.
3. Reconnect the Ethernet cable between the switch and your network.
4. Plug the switch's power cord into an electrical outlet.
The switch powers on. The network DCHP server discovers the switch and assigns it an IP address
that is in the correct subnet for the network.
Diagnostics and Troubleshooting
63