NETGEAR GS750E User Manual page 48

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select QoS > Broadcast Filtering.
The Broadcast Filtering page displays.
6. If this is the first time that you are setting up broadcast filtering, select the Enable radio button and
continue with Step 7.
Otherwise, see Step
7. Click the Apply button.
Your settings are saved and the Storm Control Rate table displays.
8. Set the storm control rate by doing the following:
a. Select one or more ports.
b. In the Storm Control Rate menu, select the maximum rate.
You can set a rate from 512 Kbps to 512 Mbps. By default, no limit is set.
c. Click the Apply button.
Your settings are saved.
9. To set a different rate for one or more other ports, repeat
8.
Optimize Performance With Quality of Service
Access the Switch Using a Web Browser
Step 8.
48
on page