Set Up A Static Link Aggregation Group - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
•

Set Up a Static Link Aggregation Group

• Set Up a Link Aggregation Control Protocol Group
• Set Up the LACP System Priority for the Switch
• Set Up LACP Port Priority and Time-Out Values
Set Up a Static Link Aggregation Group
The switch supports eight LAGs, which can be a combination of static link aggregation and LACP groups.
You must set up LAG membership before you can enable LAGs.
To specify LAG membership for a static LAG and enable a static LAG:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > LAG > LAG Membership.
6. In the LAG ID menu, select the LAG ID.
7. Enter a name in the LAG Name field.
You can enter a name of up to 15 alphanumeric characters.
8. Select the ports for the LAG by selecting the check boxes that are associated with the port numbers.
A LAG consists of at least two ports.
9. Click the Apply button.
Your settings are saved.
on page 18
on page 19
on page 20
on page 21
Access the Switch Using a Web Browser
Manage Network Settings
18
on page