Specify The Voice Vlan Properties; Enable The Voice Vlan Mode For Ports - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E

Specify the Voice VLAN Properties

By default, the voice VLAN is enabled. The default ID of the voice VLAN is ID 2. The default Class of Service
(CoS) value is 6. The voice VLAN properties apply to all traffic on the voice VLAN.
You can change the voice VLAN properties only if you enable the 802.1Q VLAN mode (see
802.1Q-Based VLANs in a Basic Configuration
Configuration on page 28).
The voice VLAN can be effective only if you enable the voice VLAN mode for individual interfaces (see

Enable the Voice VLAN Mode for Ports

To specify the voice VLAN properties:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select VLAN > Voice VLAN > Properties.
The Voice VLAN Properties page displays.
6. In the Voice VLAN ID menu, select the voice VLAN.
You can select either one of the default VLAN IDs (1, 2, or 3) or a VLAN that you manually added (see
Create 802.1Q-Based VLANs in a Basic Configuration
an Advanced Configuration
7. In the Class of Service menu, select the class value for the voice VLAN.
You can select a value from 0 (the lowest priority) to 7 (the highest priority). The default CoS value is
6.
8. Click the Apply button.
Your settings are saved.
Enable the Voice VLAN Mode for Ports
You can enable the voice VLAN mode for individual ports so that these ports become members of the voice
VLAN. By default, the voice VLAN mode is disabled for all ports.
on page 27 or
on page 33).
on page 28). The default voice VLAN ID is 2.
Use VLANS for Traffic Segmentation
33
Create 802.1Q-Based VLANs in an Advanced
Access the Switch Using a Web Browser
on page 27 or Create 802.1Q-Based VLANs in
Create
on page