Remove Devices From The Access Control Table - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
5. Select System > Maintenance > Access Control.
6. For a device or range of devices that must be able to access the switch, configure the following settings:
• Source IP Address. Enter the IP address of the device or range of devices that must be allowed
to access the switch over a web browser.
• Mask. Enter the subnet mask that is associated with the IP address.
7. Click the Add button.
The device or range of devices is added to the table and your settings are saved. Access control is now
enabled.
8. Repeat Step 6 and Step 7
table.

Remove Devices From the Access Control Table

You can remove a device from the Access Control table. If you remove all devices from the table, access
control is disabled.
To remove devices from the Access Control table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
for each device or range of devices that you want to add to the Access Control
Manage Security
39
Access the Switch Using a Web Browser on page