NETGEAR GS750E User Manual page 42

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
To manage the Auto DoS mode:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. Select System > Management > Denial of Service.
The Auto-DoS Configuration page displays.
6. Select one of the following radio buttons:
• Enable. Enables the Auto DoS mode.
• Disable. Disables the Auto DoS mode.
7. Click the Apply button.
Your settings are saved.
Access the Switch Using a Web Browser
Manage Security
42
on page