Create 802.1Q-Based Vlans In An Advanced Configuration - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
The Basic 802.1Q VLAN Identifier table displays.
9. Under each port to be added to a VLAN, enter the VLAN ID of the VLAN.
You can enter a VLAN ID from 1 to 4093. If all the VLANs share an uplink to the Internet or servers,
enter all in the VLAN ID field for the port that you want to use for the uplink.
Note If ports are members of the same LAG, you must assign them to the same VLAN.
10. Click the Apply button.
Your settings are saved.

Create 802.1Q-Based VLANs in an Advanced Configuration

In an advanced 802.1Q-based VLAN configuration, you can assign ports on the switch to a VLAN with an
ID number in the range of 1–4093 and you can add tagged or untagged ports to a VLAN. In addition, you
can use port VLAN IDs (PVIDs). By default, all ports are untagged members of VLAN 1.
To create 802.1Q-based VLANs in an advanced configuration:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
Use VLANS for Traffic Segmentation
28
Access the Switch Using a Web Browser on page